Altronix PACE1PRMTHT IP&POE+/HI-TEMP EXTENDER/CAT5E

Altronix PACE1PRMTHT IP&POE+/HI-TEMP EXTENDER/CAT5E

Altronix Pace1PRMTHT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a CAT5e or higher cable in a PoE(+) compliant format. Pace1PRMHT receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to Pace1PTM transceiver which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices that need to be installed at distances greater than 100m.

Input
Pace1PRMHT:
Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W).

Pace1PTM:
Powered by Pace1PRM.

Ethernet
Connectivity: RJ45, auto-crossover.
Wire type: 4-pair CAT-5.
Distance: CAT5e: up to 500m (1,600 ft.).
Throughput is rated to pass 100mbps of data.
With proper headend equipment multiple Megapixel cameras can be used.
Speed: 100BaseT, full duplex, auto negotiation.

LED Indicators
Green LED: PoE ON.
Yellow and Green LED (by RJ45 jack): IP Link status, 100Base-T/active.

Temperature
Operating Temperature:
Pace1PRMHT:
15W: – 40ºC to 75ºC (– 40ºF to 167ºF).
25W: – 40ºC to 49ºC (– 40ºF to 120ºF).
Pace1PTM:
15W: – 40ºC to 75ºC (– 40ºF to 167ºF).
25W: – 40ºC to 70ºC (– 40ºF to 158ºF).
30W: – 40ºC to 60ºC (– 40ºF to 140ºF).

Storage Temperature:
-40ºC to 75ºC (-40º to 167ºF).
Relative humidity: 85%, +/- 5%, non-condensing.

Operating Altitude
- 304.8 to 2,000m.