{"product_id":"altronix-t2rm7ck1dq-t2rm7f8sdq-pre-wired","title":"Altronix T2RM7CK1DQ T2RM7F8SDQ PRE-WIRED","description":"T2RM7CK1DQ T2RM7F8SDQ PRE-WIRED\n\nAltronix T2RM7CK1DQ is a 8-door managed access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T2RM7CK1DQ accommodates one (1) Intelligent Dual Reader Controller and three (3) Dual Reader Interface Modules. Trove Plus simplifies \nfield installations and provides reliable, robust critical power and control for the most demanding applications.\u003cbr\u003e\n*Also compatible with these authentic Mercury partners:\u003cbr\u003e\nAccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson \nControls, Kastle, Keri Systems, Lenel\/S2, LockState, Maxxess, Midpoint Security, NLSS, \nOpen Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, \nVanderbilt\n\n\neFlow104NB Power Supply\/Charger\nInput\nVoltage: 120VAC, 60Hz, 4.5A max.\nMain Fuse: 6.3A \/ 250V.\n\nOutput\nVoltage: 24VDC @ 10A.\nAuxiliary: 1A (unswitched).\nProtection: Overvoltage protection. Filtered and regulated.\n\n\nBattery Charging\nType: Sealed lead acid or gel type.\nFuse Rating: 15A\/32V.\nFailover: Upon AC loss, instantaneous.\n\u003ci\u003e(Batteries are sold separately).\u003c\/i\u003e\n\nFire Alarm Disconnect\nSupervised: Latching or non-latching.\nEOL: 10K Resistor.\n\nSupervision\nAC Failure: Form “C” contacts.\nBattery: Form “C” contacts.\nLow DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.\n\nIndicators LED\nAC Input: 120VAC is present.\nDC Output: 24VDC is present.\nBattery: Discharged or not connected.\n\nVR6 Voltage Regulator\nInput\nVoltage: 24VDC from eFlow104NB.\n\nOutput\nVoltage: 12VDC.\nCurrent: 6A continuous.\nOther: Surge suppression.\n\nIndicators LED\nInput: 24VDC is present.\nOutput: Powered.\n\n\nPDS8CB Dual Input Power Distribution Module\nInput\nVoltage: 12VDC from VR6 and 24VDC from eFlow104NB.\nInput PTC: 9A.\n\nOutputs\nVoltage: 12VDC and\/or 24VDC.\nAny of the eight (8) power outputs are selectable to follow power Input 1 or Input 2.\nIndividual outputs may be set to OFF position for servicing.\n\nOutputs Ratings\nPTCs are rated 2.5A.\n\nIndicators (LED)\nDC Output: Eight (8) individual output LEDs.\nGreen: 12VDC\nRed: 24VDC.\n\n\nLINQ8ACMCB Networked Access Power Controller\nInput\nVoltage: 24VDC from eFlow104NB and 12VDC from VR6\nInput PTCs: 9A\n\nOutputs\nPTC protected outputs\nAny of the eight (8) power outputs are selectable to follow power Input 1 or Input 2\nIndividual outputs may be set to OFF position for servicing\n\nOutput PTCs:\n2.5A\n\n\nProgramming Features:\nEight (8) Programmable Outputs:\n- Fail-safe, fail-secure or auxiliary outputs\n- Input controlled or manually controlled through software\n- High (over) and low (under) voltage and current monitoring by output\n- Multiple outputs may be programmed to be triggered by a single input\n- Battery back-up by output\n\nEight (8) Programmable Trigger Inputs:\n- Normally open (NO), Normally closed (NC) or Open collector sink inputs\n- Wet Input (5VDC - 24VDC) with 10k resistor\n- Any combination of the above\n\nOther Programmable Trigger Inputs:\n- Monitor power supply(ies) input for voltage and current limits (high\/low)\n- Input and output current calibration, Programmable timer events\n- Programmable user levels, Enable or disable alerts by type\n- Programmable alert reporting delay\n\nIndicators (LED)\nGreen AC LED: indicates AC trouble condition\nGreen BAT LED: indicates battery trouble condition\nGreen FACP LED: indicates FACP disconnect is triggered\nFlashing Blue Heartbeat LED: indicates network connection\nIndividual OUT1 - OUT8 Red LEDs: indicate outputs are triggered\nIndividual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red)\n\n\nEnvironmental\nTemperature\nOperating: 0° C to 49° C (32° F to 120° F).\nStorage: - 20° C to 70° C ( - 4° F to 158° F).\n\nRelative Humidity\nRelative Humidity: 85%  +\/- 5%.\n\nBTU\/Hr. (approx.):\n123 BTU\/Hr.","brand":"Altronix","offers":[{"title":"Default Title","offer_id":46151442825412,"sku":"T2RM7CK1DQ","price":2257.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2649\/1076\/files\/main_c39a75ca-0264-49cb-8db9-ba3809152267.jpg?v=1778870964","url":"https:\/\/avdepot.net\/products\/altronix-t2rm7ck1dq-t2rm7f8sdq-pre-wired","provider":"AV Depot","version":"1.0","type":"link"}