{"product_id":"altronix-strikeit4-dual-low-curr-lock-hard-device","title":"Altronix STRIKEIT4 DUAL LOW CURR LOCK HARD DEVICE","description":"Altronix STRIKEIT4 DUAL LOW CURR LOCK HARD DEVICE\n\nAltronix StrikeIt4 will operate up to two (2) low current lock hardware devices simultaneously. It is designed to operate motorized electric latch retraction exit devices, electric strikes, mag-locks, electric mortise and cylindrical locksets, etc. Each lock output has an adjustable re-lock delay timer. It will control a pair of doors simultaneously, or independently control two single door leafs. StrikeIt4 has integrated output relays which trigger automatic door operators and control ADA activation push plates\/accessories. In addition, one (1) 12VDC and one (1) 24VDC unswitched auxiliary voltage outputs are provided for powering ancillary devices. A configurable FACP interface will either remove or apply power from the lock outputs when activated. LED status indicators are provided to\nmonitor input status, battery condition, AC power loss, and FACP status. Intelligent logic provides protection against accidental shorting of lock outputs.\n\n\nInput\nInput 115VAC, 60Hz, 2.5A or 230VAC, 50Hz, 1.5A.\nTwo (2) Normally Open (N.O.) trigger inputs (Input 1 and Input 2).\nFACP Normally Closed (N.C.) input.\nTwo normally open ADA inputs for special mode of interfacing with automatic door operators.\n\nOutputs\nTwo (2) 19.8VDC-26.4VDC rated individually controlled lock outputs configurable for fail-secure or fail-safe electronic locking hardware for applications with battery back-up. 24VDC-26.4VDC rated for applications without battery back-up (US applications only). Current rating 2A combined.\nOne (1) 19.8VDC-26.4VDC @ 0.8A rated filtered regulated auxiliary output for applications with battery back-up, 24VDC-26.4VDC @ 0.8A rated for applications in US not requiring battery back-up. Not affected by FACP trigger.\nOne (1) 12VDC filtered regulated auxiliary output rated 0.5A. Not affected by FACP trigger.\nTwo (2) follower Normally Open relay outputs for controlling ADA actuators\/accessories rated 28VDC @ 0.5A.\nTwo momentary door operator activation relay outputs.\nTrouble relay output indicating low AC voltage trouble and battery trouble.\n\nBattery Charging\nRequires two (2) 12V batteries to be wired in series for 24V operation.\nWhen 7AH batteries are used, battery capacity for emergency stand-by is 30 minutes.\nBuilt-in charger for sealed lead acid batteries.\nMaximum charge current 650mA.\nAutomatic switch over to stand-by battery when AC fails.\nBattery PTC rating: 6A.\nBattery leads included.\n\u003ci\u003e(Batteries are sold separately).\u003c\/i\u003e\n\nVisual Indicators\nGreen AC Power LED indicates AC presence.\nRed trigger output LEDs indicate panic device status \/ opened (activated, short circuit).\nGreen Fire Alarm Interface (FAI) LED indicates FACP interface is activated.\nRed Battery LED indicates low battery during AC failure and battery test.\nGreen AC status LED indicates loss of AC power.\n\nFire Alarm Disconnect\nNormally Closed FACP trigger input.\nProgrammable Fire Alarm Disconnect options:\nRemoves power to outputs and disables delayed follower relays.\nConnects power to lock outputs and enables delayed follower relays.\n\n\nTemperature\nOperating: 0° C to 49° C (32° F to 120° F).\nStorage: - 20° C to 70ºC ( - 4° F to 158° F).\nRelative Humidity: 85%  +\/- 5%.\nBTU\/Hr. (approx.): 120 BTU\/Hr.","brand":"Altronix","offers":[{"title":"Default Title","offer_id":46151424278724,"sku":"STRIKEIT4","price":273.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2649\/1076\/files\/main_4eca27b4-df18-4761-a53d-e78ef9522bba.jpg?v=1778870886","url":"https:\/\/avdepot.net\/products\/altronix-strikeit4-dual-low-curr-lock-hard-device","provider":"AV Depot","version":"1.0","type":"link"}