{"product_id":"altronix-maximal7fd-eflow104nb-pwr-sply-w-2-acm8cb","title":"Altronix MAXIMAL7FD EFLOW104NB PWR SPLY W\/2-ACM8CB","description":"Altronix MAXIMAL7FD EFLOW104NB PWR SPLY W\/2-ACM8CB\n\nMaximal7FD Access Power Controller distributes and switches power to access control systems and accessories. It converts a 120VAC 60Hz input into sixteen (16) independently controlled 24VDC power-limited PTC protected outputs. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs. All interconnecting equipment must be UL Listed.\n\n\nInput\n120VAC 60Hz, 4.5A input.\nPower supply input options:\na) Two (2) common power input for either ACM8CB and lock power (factory installed).\nb) Two (2) isolated power inputs (external power supply is required). Current is determined by the power supply connected, not to exceed a maximum of 10A total.\n\nSixteen (16) Access Control System trigger inputs.\nInput options:\na) Sixteen (16) normally open (NO) dry trigger inputs.\nb) Sixteen (16) open collector inputs.\nc) Any combination of the above.\n\n\nOutput\n24VDC power-limited outputs.\nMaximum output current: 24VDC @ 9.2A.\nSixteen (16) PTC Protected Power-Limited independently controlled outputs (auto-resettable).\nOutput options:\na) Sixteen (16) Fail-Safe filtered power outputs.\nb) Sixteen (16) Fail-Secure filtered power outputs.\nc) Any combination of the above.\n\nSixteen (16) auxiliary power outputs (unswitched) (outputs are rated 2A).\nFiltered and electronically regulated outputs (built-in power supply).\nThermal and short circuit protection with auto reset.\n\nFuse Ratings\nPower Supply input fuse rated @ 6.3A\/250V.\nACM8CB boards main fuse is rated at 10A. PTC protected outputs are rated @ 2.5A each.\n\nSupervision\nAC fail supervision (form \"C\" contacts).\nNotification trigger is selectable for 30 seconds (factory set) or 2 hours.\nBattery fail and presence supervision (form \"C\" contacts).\nLow power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.\n\nFeatures\nFire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.\nFire Alarm disconnect input options:\na) Normally open (NO) or normally closed (NC) dry contact input.\nb) Polarity reversal input from FACP signaling circuit.\n\nAlarm output relay indicates that FACP input is triggered (form \"C\" contact rated @ 1A 28VDC).\n\nBattery Charging\nCapacity: 12AH\/12VDC (4 within enclosure); 40AH\/65AH (requires separate enclosure).\nType: Sealed lead acid or gel type.\nFailover: Upon AC loss, instantaneous.\n\u003ci\u003e(Batteries are sold separately).\u003c\/i\u003e\n\nVisual Indicators\nRed LEDs indicate outputs are triggered (relays energized).\nGreen LED indicates FACP disconnect is triggered.\nAC input and DC output LED indicators.\n\nElectrical\nTemperature:\nOperating: 0° C to 49° C (32° F to 120° F).\nStorage: - 20° C to 70° C ( - 4° F to 158° F).\n\nRelative Humidity: 85%  +\/- 5%.\nBTU\/Hr. (approx.): 113 BTU\/Hr.\nSystem AC input VA requirement: 540VA.","brand":"Altronix","offers":[{"title":"Default Title","offer_id":46151405928644,"sku":"MAXIMAL7FD","price":851.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2649\/1076\/files\/main_07705c3b-c6b2-4592-9b1c-f9952263e3c2.jpg?v=1778870789","url":"https:\/\/avdepot.net\/products\/altronix-maximal7fd-eflow104nb-pwr-sply-w-2-acm8cb","provider":"AV Depot","version":"1.0","type":"link"}