{"product_id":"altronix-linq8acm-8-fuse-network-access-pwr-cont","title":"Altronix LINQ8ACM 8 FUSE NETWORK ACCESS PWR CONT","description":"Altronix LINQ8ACM 8 FUSE NETWORK ACCESS PWR CONT\n\nAltronix LINQ8ACM UL Listed dual input network access power controller which can be installed in Altronix wall and rack mount enclosures to facilitate access control deployment. Access Power Controller dual input design allows power to be steered from one (1) or two (2) independent low voltage 12 or 24 VDC Altronix power supplies to eight (8) independently controlled fused  protected outputs. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. LINQ8ACM will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and\/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple LINQ8ACM modules. This feature allows you to distribute the power over more outputs for larger systems. Built-in LINQ™ Network Power Management facilitates monitoring, reporting and control of power\/diagnostics. \n\u003cbr\u003e\u003cbr\u003e\nLINQ8ACM has built-in LINQ technology which facilitates monitoring, reporting, and control of one (1) or two (2) low voltage AC or supervised DC power supply\/chargers over the network. They report diagnostics via Email and Windows Dashboard Alert notifications, greatly reducing system downtime and eliminating unnecessary service calls. LINQ8ACM retrofits with most currently installed multi-output power supply\/chargers.\n\n\nInput\nTwo (2) Independent Low Voltage Inputs.\nInput Voltage Options:\nSingle Input:\nInput1:\n12 or 24 VDC from eFlow series power supply.\n\nDual Input Option 1:\nInput 1:\n12 or 24 VDC from eFlow series power supply.\nInput 2:\na) 12 or 24 VDC from eFlow series power supply.\nb) 5 or 12 VDC from VR6 voltage regulator.\n\nDual Input Option 2:\n12 and 24 VDC from Tango1B PoE Driven Power Supply.\n\nVoltage Range\n5VDC to 24VDC, up to 10A each or 20A total input.\n\nCurrent Consumption: 0.6A @ 12V, 0.3A @ 24V with all relays energized.\nMain Fuse Rating: 15\/32A.\n\nOutputs\nFuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max.\nDo not exceed the individual power supply ratings.\nAny of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.\nIndividual outputs may be set to OFF position for servicing.\n\nOutput Ratings\nFuses are rated 3A\/32V each.\nTotal output current is determined by the power supply(ies), not to exceed a maximum of 10A for each input.\n\nProgramming Features\nEight (8) Programmable Outputs:\nFail-safe, fail-secure or auxiliary outputs.\nInput controlled or manually controlled through software.\nHigh (over) and low (under) voltage and current monitoring by output.\nMultiple outputs may be programmed to be triggered by a single input.\nBattery back-up by output.\n\nEight (8) Programmable Trigger Inputs:\nNormally open (NO).\nNormally closed (NC).\nOpen collector sink inputs.\nWet Input (5VDC - 24VDC) with 10k resistor.\nAny combination of the above.\n\nOther Programmable Trigger Inputs:\nMonitor power supply(ies) input for voltage and current limits (high\/low).\nInput and output current calibration.\nProgrammable timer events.\nProgrammable user levels.\nEnable or disable alerts by type.\nProgrammable alert reporting delay.\n\n\nFire Alarm Disconnect\nSupervised: Inactive, latching or non-latching, individually selectable for any or all of the eight (8) outputs.\nEOL: 10K Resistor.\n\nLED Indicators\nGreen AC LED: indicates AC trouble condition.\nGreen BAT LED: indicates battery trouble condition.\nGreen FACP LED: indicates FACP disconnect is triggered.\nFlashing Blue Heartbeat LED: indicates network connection.\nIndividual OUT1 - OUT8 Red LEDs: indicate outputs are triggered.\nIndividual Voltage LEDs: indicate 12VDC (Green) or 24VDC (Red).\n\nElectrical\nTemperature:\nOperating: 0° C to 49° C (32° F to 120° F).\nStorage: - 20° C to 70° C ( - 4° F to 158° F).\n\nRelative Humidity 93%  +\/- 5%.\nBTU\/Hr. (approx.): 4 BTU\/Hr.\nMounting hardware included.","brand":"Altronix","offers":[{"title":"Default Title","offer_id":46151399801028,"sku":"LINQ8ACM","price":300.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2649\/1076\/files\/main_45a33efd-07a1-438b-b782-9d7dc555e6b3.jpg?v=1778870753","url":"https:\/\/avdepot.net\/products\/altronix-linq8acm-8-fuse-network-access-pwr-cont","provider":"AV Depot","version":"1.0","type":"link"}