{"product_id":"altronix-eflow104nka8-24-12vdc-6a-8out-115vac","title":"Altronix EFLOW104NKA8 24\u002612VDC@6A\/8OUT, 115VAC","description":"Altronix EFLOW104NKA8 24\u0026amp;12VDC@6A\/8OUT, 115VAC\n\nAltronix eFlow104NKA8 sub-assembly kit converts a 120VAC 60Hz input into eight (8) fuse protected outputs. Outputs are individually selectable, providing 12VDC or 5VDC up to 6A and\/or 24VDC up to 10A (240W total power) for access control panels, door locks, and ancillary devices. Power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. eFlow104NKA8 will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and\/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple ACMS8 modules. This feature allows you to distribute the power over more outputs for larger systems.\n\n\neFlow104NB Power Supply\/Charger\nInput\nVoltage: 120VAC, 60Hz, 4.5A max.\nInput Fuse: 6.3A \/ 250V.\n\nOutputs\nVoltage: 24VDC @ 10A.\nAuxiliary: 1A (unswitched).\nProtection: Overvoltage protection. Filtered and regulated.\n\n\nBattery Charging\nType: Sealed lead acid or gel type.\nFuse Rating: 15A @ 32VDC.\nFailover: Upon AC loss, instantaneous.\n\u003ci\u003e(Batteries are sold separately).\u003c\/i\u003e\n\nFire Alarm Disconnect\nSupervised: Latching or non-latching.\nEOL: 10K Resistor.\n\nSupervision\nAC Failure: Form “C” contacts.\nBattery: Form “C” contacts.\nLow DC Power Shutdown: Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.\n\nIndicators LED\nAC Input: 120VAC is present.\nDC Output: Powered.\nBattery: Discharged or not connected.\n\nVR6 Voltage Regulator\nInput\nVoltage: 24VDC from eFlow104NB.\n\nOutput\nVoltage: 12VDC.\nCurrent: 6A continuous.\nOther: Surge suppression.\n\nIndicators LED\nInput: 24VDC is present.\nOutput: Powered.\n\n\nACMS8 Dual Input Access Power Controller\nInput\nVoltage: 24VDC from eFlow104NB and 12VDC or 5VDC from VR6.\nInput Fuse: 15A \/ 32V.\n\nOutputs\nVoltage: 12 or 24VDC individually selectable.\nEight (8) selectable 12VDC or 24VDC independently controlled outputs or eight (8) independently controlled Form “C” relay outputs:\na) Fail-Safe and\/or Fail-Secure power outputs.\nb) Form “C” Relays. 28VAC or VDC @ 2.5A Rated.\nc) Auxiliary power outputs (unswitched).\nd) Any combination of the above.\nAny of the eight (8) fuse protected power outputs are selectable to follow power Input 1 or Input 2.\nIndividual outputs may be set to OFF position for servicing.\nOutput Fuses: 3A \/ 32VDC.\n\nIndicators (LED)\nRed LEDs: Outputs are triggered (relays energized).\nBlue LED: FACP disconnect is triggered.\nOut1 - Out8: Bi-colored LEDs indicate 12 or 24VDC.\n\n\nEnvironmental\nTemperature\nOperating: 0° C to 49° C (32° F to 120° F).\nStorage: - 20° C to 70° C ( - 4° F to 158° F).\n\nRelative Humidity\nRelative Humidity: 85%  +\/- 5%.\n\nBTU\/Hr. (approx.):\n123 BTU\/Hr.","brand":"Altronix","offers":[{"title":"Default Title","offer_id":46151397638340,"sku":"EFLOW104NKA8","price":537.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2649\/1076\/files\/main_f8da2f88-061c-4a61-a2f1-b3bdd9dbdc50.jpg?v=1778870751","url":"https:\/\/avdepot.net\/products\/altronix-eflow104nka8-24-12vdc-6a-8out-115vac","provider":"AV Depot","version":"1.0","type":"link"}