{"product_id":"altronix-al1024acmcbj220-24vdc-10a-acm8cb-220v-in","title":"Altronix AL1024ACMCBJ220 24VDC@10A, ACM8CB, 220V IN","description":"AL1024ACMCBJ220 24VDC@10A, ACM8CB, 220V IN\n\nAltronix AL1024ACMCBJ220 distribute and switch power to access control systems and \naccessories. It converts a 220VAC 50\/60Hz input into eight (8) independently controlled \n24VDC PTC protected outputs. Outputs are activated by an open collector sink or \nnormally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, \nPush Button, PIR, etc. Units will route power to a variety of access control hardware devices \nincluding: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in \nboth Fail-Safe and\/or Fail-Secure modes. The FACP Interface enables Emergency Egress, \nAlarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect \nfeature is individually selectable for any or all of the eight (8) outputs.\n\n\nInput\nVoltage: 220VAC (range 198VAC - 256VAC) 50\/60Hz rated @ 10A\nFuse Rating: 6.3A\/250V\nPower supply input options:\na) One (1) common power input for ACM8CB and lock power (factory installed).\nb) Two (2) isolated power inputs - One (1) to power the ACM8CB and one (1) for lock accessory power (external power supply is required). Current is determined by the power supply connected, not to exceed a maximum of 10A total).\n\nEight (8) Access Control System trigger inputs.\nInput options:\na) Eight (8) normally open (NO) inputs.\nb) Eight (8) open collector inputs.\nc) Any combination of the above.\n\n\nOutput\n12VDC or 24VDC outputs.\nPower-limited outputs.\nEight (8) independently controlled Fail-Safe and\/or Fail-Secure power outputs.\nEight (8) auxiliary power outputs (unswitched).\nOutput PTCs are rated @ 2.5A.\nFiltered and electronically regulated outputs (built-in power supply).\n\nFeatures\nFire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.\nFire Alarm disconnect input options:\na) Normally open (NO) or normally closed (NC) dry contact input.\nb) Polarity reversal input from FACP signaling circuit.\n\nAlarm output relay indicates that FACP input is triggered (form \"C\" contact rated @ 1A 28VDC).\nShort circuit and thermal overload protection.\nAC fail supervision (form \"C\" contact).\n\nVisual Indicators\nRed LEDs indicate outputs are triggered (relays energized).\nGreen LED indicates FACP disconnect is triggered.\nAC input and DC output LED indicators.\n\nBattery Charging\nBuilt-in charger for sealed lead acid or gel type batteries.\nAutomatic switch over to stand-by battery when AC fails.\nAC input and DC output LED indicators.\nZero voltage drop when unit switches over to battery backup (AC failure condition).\nBattery fail and battery presence supervision (form \"C\" contact).\n\u003ci\u003e(Batteries are sold separately).\u003c\/i\u003e\n\nTemperature\nOperating: 0ºC to 49ºC (32ºF to 120ºF).\nStorage: - 20ºC to 70ºC ( - 4ºF to 158ºF).\nRelative Humidity: 85%  +\/-  5%.\nBTU\/Hr. (approx.):\n24VDC: 123 BTU\/Hr.","brand":"Altronix","offers":[{"title":"Default Title","offer_id":46151464485060,"sku":"AL1024ACMCBJ220","price":397.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0712\/2649\/1076\/files\/main_2079c404-a039-4248-aaeb-fc2b9a5ed9f4.jpg?v=1778871057","url":"https:\/\/avdepot.net\/products\/altronix-al1024acmcbj220-24vdc-10a-acm8cb-220v-in","provider":"AV Depot","version":"1.0","type":"link"}